CynkoMet N-233 Series, Instructions For Use And Operation

Page: 48 / 149

Cynko Met
N-233
Page 48

stop the tractor engine and remove the key from the ignition.

install and secure the hitch swivel from falling out or check the locking
of the automatic hitch.

connect cables and hoses of the electrical, hydraulic and brake
systems to the tractor according to the instructions.

release the parking brake of the machine.
CAUTION!
CAUTION!
At the time of the coupling, unauthorized people cannot
be between the spreader and the tractor. The operator of
the tractor, when connecting the machine should be
particularly careful when working and make sure that in the
course of coupling, other people are not in the danger
zone.
CAUTION!
CAUTION!
When connecting the hydraulic hoses to the tractor, pay
attention that the hydraulic system of the tractor is not
under pressure.
CAUTION!
CAUTION!
When coupling ensure adequate visibility. If the case of
restricting visibility, use the sound signal from the tractor or
use the help of another person.
CAUTION!
CAUTION!
Connecting the spreader to a hitch other than the original
transport hitch is unacceptable because it threatens the
safety of road traffic and to third parties.
After completion of the machine coupling, check the
security of the hitch.
When connecting the braking system (two-wire pneumatic), the
correct sequence of connecting hoses is important. Hoses are
designated by color by means of colored protective covers.
Be the first to connect the plug marked yellow to a yellow socket
in the tractor, and then the plug marked in red to the red socket in the
tractor.