CynkoMet N-233 Series, Instructions For Use And Operation

Page: 19 / 149

Cynko Met
N-233
Page 19
3.2 Attaching and detaching the machine to the tractor

Before attaching the spreader, make sure that the tractor and spreader
are technically efficient.

When connecting the spreader, use only the intended trailer hitch in
accordance with the instruction manual of the tractor. After completion
of the machine coupling, check the security of the hitch. Read the whole
manual for the tractor's use If the tractor is equipped with an automatic
hitch, make sure the coupling operation has been completed correctly.

Be very careful when you connect the machine.

The presence of persons on the spreader’s cargo bed and between
machines during coupling is strictly prohibited. The adjustable drawbar
support must always be used.

Coupling and uncoupling of the spreader may only take place when the
machine is immobilized with the parking brake.
3.3 Road wheels

When working with the driving wheels (wheel replacement) - always secure
the spreader against uncontrolled movement by means of the parking brake
and wedges laid under the wheels.

Wheel replacement is to be performed on a stable surface, in order to prevent
dropping of the jack or other wheels.

Repair work should be performed using the appropriate tools.

After each every installation of a wheel, tighten the fastening nuts after the first
10 working hours, then check their tightness every 50 working hours.

Inspect air pressure regularly.

Dismantling the wheels can be carried out only in the case when the
spreader is not loaded.

Avoid damaged road surface, quick and variable maneuvers and high
speed during turns.

Tire valves are to be protected with caps to prevent penetration of
impurities.