![background image](http://html1.mh-extra.com/html/cybex/xp4010/xp4010_installer-user-manual_2703692073.webp)
6 7
LCD Display
Operation
The XP4400 front panel supports a 4x20 character LCD display which is used
to configure and display status for your XP4400 unit. As soon as you power on
your XP4400 unit, the Idle Display Menu appears as shown below:
----XP 4400----
Chassis 000
www.cybex.com
The Contrast Menu
If your display is either too bright or cannot easily be seen, press the
Right
button to reach the Contrast Menu.
DISPLAY CONTRAST
0
100%
########
****EDIT MODE****
Use your
Up
and
Down
buttons to increase or decrease the contrast of your
display. Press the
Right
button to save the changes and return to the Idle
Display Menu. Press the
Left
button to return to the Idle Menu without saving.
If neither button is pressed within 5 seconds of your last change, you will
automatically return to the Idle Display Menu without saving the changes.
The Chassis ID Menu
From the Idle Display Menu, press the
Down
button to reach the Chassis ID Menu.
Chassis ID
0
The first time you power on your XP4400 unit, the Chassis ID will read as “0”.
NOTE: You must change this to a valid system chassis ID before integrating
the XP4400 into your configuration.
To set or change your chassis ID, press the
Right
button. The following
menu appears:
Chassis ID
->new ID ###
old ID ###
****EDIT MODE****
The old ID is shown. Press the
Up
and
Down
buttons to set a new chassis ID for
your XP4400 unit. Press the
Right
button to save the changes and return to the
Chassis ID Menu. Press the
Left
button to return to the Chassis ID Menu
without saving.