![background image](http://html1.mh-extra.com/html/cybex/xp4010/xp4010_installer-user-manual_2703692149.webp)
143
Key Sequence
Action
<CM>
@0
<Enter>
Changes the hot-key sequence to the default:
1.Press and hold down the ‘Num Lock’ key.
2.Press and release the minus (-) key on the numeric
keypad.
3.Release the ‘Num Lock’ key.
<CM>
@1
<Enter>
Changes the hot-key sequence to the 1st alternate:
1.Press and hold down the ‘Num Lock’ key.
2.Press and release the asterisk (*) key on the
numeric keypad.
3.Release the ‘Num Lock’ key.
<CM>
@2
<Enter>
Changes the hot-key sequence to the 2nd alternate:
1.Press and hold down the ‘Num Lock’ key.
2.Press and release the plus (+) key on the numeric
keypad.
3.Release the ‘Num Lock’ key.
<CM>
@3
<Enter>
Changes the hot-key sequence to the 3rd alternate:
1.Press and hold down the ‘Num Lock’ key.
2.Press and release the numeric keypad forward
slash (/) key.
3.Release the ‘Num Lock’ key.
<CM>
@4
<Enter>
Changes the hot-key sequence to the 4th alternate:
1.Press and hold down the ‘Control’ key.
2.Press and release the tilde (~) key.
3.Release the ‘Control’ key.
<CM>
REBOOT
Addr[n]
<Enter>
Reboots the device connected to the XPRB at
Addr
.
The value,
n
(1-6), indicates Power Port on XPRB.
<CM>
XPRB
Addr1[n]
=
Addr2
<Enter>
Associates the XPRB at
Addr1,
Power Port
n
with
the computer interface module at
Addr2.
<CM>
REBOOT
<Enter>
Reboots the selected computer, if connected to an
XPAB or associated with a power port on an XPRB.
<CM>
K
n
<Enter>
Sets the keyboard scanset for AT and PS/2 systems
where
n
is a scanset number 1-3.