manualshive.com logo in svg

CyberOptics WaferSense, User Manual

The CyberOptics WaferSense product comes with a comprehensive User Manual that is available for free download. Discover the full range of features and benefits, easily understand product functionality and maximize its potential by accessing the manual at manualshive.com. Enhance your experience with this cutting-edge technology.

Share
Download
background image

Table of Contents

v

Using the Rechargeable Battery................................................... 3.17

Monitoring the Battery Level................................................................3.17
Charging the Battery ..............................................................................3.17

Monitoring the Wireless Connection to the Teaching Wafer ...... 3.18
Changing the Pairing Between the Teaching Wafer and Link.... 3.19
Saving Your Settings.....................................................................3.20

Loading Settings from a File.................................................................3.20

Chapter 4

Creating Target Configuration Files ............................................. 4.1

Choosing a Target ..........................................................................4.1
Measuring the Target .....................................................................4.2
Running TeachTarget ....................................................................4.2

Chapter 5

Maintaining Your ATS .................................................................. 5.1

Annual Factory Calibration and Battery Replacement ..................5.2
Battery Use and Disposal ...............................................................5.2
Updating Your ATS Wafer Firmware.............................................5.3

Chapter 6

Specifications................................................................................. 6.1

System Requirements .....................................................................6.1
ATS Hardware ................................................................................6.1

Environmental .......................................................................................... 6.1
Power.......................................................................................................... 6.1
Range and Accuracy................................................................................. 6.1

Index.....................................................................Index.1

Summary of Contents for WaferSense

























































Reviews:

No comments

Related manuals for WaferSense

Brands by name

Popular brands

Load more brands