manualshive.com logo in svg

CyberOptics WaferSense, User Manual

The CyberOptics WaferSense product comes with a comprehensive User Manual that is available for free download. Discover the full range of features and benefits, easily understand product functionality and maximize its potential by accessing the manual at manualshive.com. Enhance your experience with this cutting-edge technology.

Share
Download
background image

Chapter 3. Using Your ATS

3.2

Using the ATS Teaching Wafer Buttons and 

Status Lights

ATS teaching wafers have two buttons:

•

ON OFF.

 Turns the teaching wafer on and off.

 

•

NEW PAIR.

 Changes the pairing between a teaching wafer and a link (see 

“Changing 

the Pairing Between the Teaching Wafer and Link,” on page 3.19

).

ATS teaching wafers also have the following status lights:

•

On.

 Glows red while the teaching wafer is turned on. 

•

Charging.

 Glows red when the teaching wafer is being charged in the charging case.

•

Charging Done.

 Glows red when the battery has reached at least 90% of full charge.

•

Connection Status.

 Glows red when the teaching wafer has established 

communication with the link. Blinks slowly while the teaching wafer is trying to 
establish a connection with the link.

•

Pair Status.

 Glows red when the teaching wafer is paired with a link (see 

“Changing 

the Pairing Between the Teaching Wafer and Link,” on page 3.19

). 

Summary of Contents for WaferSense

























































Reviews:

No comments

Related manuals for WaferSense

Keithley 4200-SCS User Manual preview
4200-SCS
Brand: Keithley Pages: 335

Brands by name

Popular brands

Load more brands