Chapter 2. Installing Your ATS
2.3
Installing the Wireless Link
To install the wireless link:
1. Turn on your computer.
2. Locate an unused, high-power USB port on your computer. The ATS wireless link
module requires a high-power USB port, such as the built-in ports on your computer and
ports on USB hubs that have power cords. Unpowered USB hubs won’t work.
3. The USB cable provided with your ATS has a different plug on each end. Locate the end
with the plug that matches the USB port on your computer and plug the cable into
the port.
4. Plug the other end of the cable into the link module.
The Windows operating system recognizes the new link module hardware and displays
the Found New Hardware Wizard, as shown in
. If the wizard your system
displays doesn’t offer to check with Windows Update, skip to step
.
Figure 2.2: Found New Hardware Wizard
5. Choose
No, not this time
and click
Next
.
