Chapter 2. Installing Your ATS
2.6
Registering Your Teaching Wafer for Calibration
Service
To maintain optimum performance, every twelve months you should have your teaching wafer
calibrated and the battery replaced. These services can be performed only at the factory.
To help you keep track of the next service date so you can schedule this service when it is
convenient, register your WaferSense ATS teaching wafer with the factory. When you start the
TeachView application (see
“Running the TeachView Application,” on page 2.7
), it prompts
you to register your teaching wafer for calibration. You can also register your teaching wafer in
any of the following ways:
•
On the Internet:
www.CyberopticsSemi.com/ws_register.html
•
By phone: 800-366-9131 (US and Canada only)
•
By faxing the
WaferSense ATS Calibration Registration
to: (503) 495-2201
•
By sending an e-mail message containing the information specified on the
WaferSense
ATS Calibration Registration
to: [email protected].
