manualshive.com logo in svg

CyberOptics WaferSense, User Manual

The CyberOptics WaferSense product comes with a comprehensive User Manual that is available for free download. Discover the full range of features and benefits, easily understand product functionality and maximize its potential by accessing the manual at manualshive.com. Enhance your experience with this cutting-edge technology.

Share
Download
background image

Chapter 5. Maintaining Your ATS

5.2

Annual Factory Calibration and Battery 

Replacement

Every twelve months, you should return your teaching wafer to the CyberOptics 
Semiconductor factory, where we will calibrate the teaching wafer and replace the internal 
rechargeable battery. You can find the date when the teaching wafer was last calibrated at the 
factory by choosing the 

Help > About your ATS Wafer

 menu item in the TeachView 

application. 

When the date for calibration approaches, the TeachView application will occasionally notify 
you by displaying the ATS Wafer Calibration Status dialog, as shown in

Figure 5.1

. 

Figure 5.1: ATS Wafer Calibration Status Dialog

If you drop the teaching wafer or suspect that it is no longer in calibration, contact CyberOptics 
Semiconductor technical support (see 

“Technical Support,” on page 2.9

).

Battery Use and Disposal

Your ATS teaching wafer contains a lithium-polymer battery. To avoid damage to the teaching 
wafer, use the supplied charger only. Do not charge the teaching wafer at temperatures outside 
the specified range (0 °C to 45 °C). Do not incinerate or dispose of the teaching wafer into fire. 
Do not immerse the teaching wafer when cleaning or spill liquids on the teaching wafer.

Summary of Contents for WaferSense

























































Reviews:

No comments

Related manuals for WaferSense

Brands by name

Popular brands

Load more brands