59
The CU-SP2 can only communicate with the devices designated by the manufacturer.
Before pairing the CU-SP2 with an external device (Printer, CU-EM1), turn on the power of the
device to be connected.
When the CU-SP2 is paired with an external device, the external device will operate as follows:
•
Printer: Displays the message “You can use this printer!”
•
CU-EM1: 3 long beeps.
The Printer and CU-EM1 are not part of the standard package contents. If you want to
purchase them, please contact us by referring to [Appendix A: Parts and Accessories] of these
Instructions for Use.
CPR Guide
•
Refer to [Section 5.4.3: Setting the CPR Guide] in these Instructions for Use.
Change Password
The default password of the device is Soft Key
'1
1
1
1'
, (Soft Keys are labeled 1~3 from
left to right.) and the password is a combination of the three Soft Keys. In the Device Setup,
‘Device Mode’ and ‘Manual Override’ have different user rights depending on the setting. For
more on the rights to use the product, refer to the Instructions for Use, [4.11: Manual Override
(Options)]. When you activate the security mode, you should enter the password to change
‘Device Mode’ and ‘Manual Override’. We recommend having the password changed after
receiving the CU-SP2 in order to prevent access by unauthorized users. Also we recommend
that you change the password on a regular basis to prevent password exposure. The password
is changed in the following 4 steps:
Input Password