CRZ ERZ Series, Manual

Page: 94 / 127

94
(2) Check the friction plates with the front brake lower pump assembly to determine the
wear of the friction plates. If any one of the friction plates wears to a thickness of 1 mm, the
two friction plates must be replaced.
(3) The friction plates are inspected by the rear brake lower pump assembly to determine
the wear of the friction plates. If any one of the friction plates is worn to a thickness of 1 mm,
the two friction plates must be replaced.
(4) If you need to replace it, please use the original friction plate and find a professional
person to replace it. Refer to the “Maintenance Cycle” for the maintenance cycle of the
friction plate.
3. Other check
Check that the front brake lever and foot brake lever assembly are properly installed and
that the bolts are secure. Make sure there is no liquid leakage, check the high pressure tubing
and fittings for aging or cracks.