CRZ ERZ Series, Manual

Page: 108 / 127

108
hours of driving or after a game. In case of dusty environment, increase the number of
maintenance.
2. Linkage bearing
After 7.5 hours of riding, disassemble, clean, inspect and lubricate all bearings, oil seals
and bushings of the triangular rocker and cradle to maintain proper suspension performance
and minimize component wear and service life.
(1) Place a bench under the engine to disengage the front wheels from the ground;
(2) Remove the rocker arm mounting bolts in sequence;
(3) Remove the triangular linkage arm and the cradle fork;
(4) Remove the oil seal, needle bearing and spacer in the linkage arm assembly;
(5) Clean the oil seal, needle bearing and spacer with diesel oil. Check whether there is
any damage during cleaning, whether the needle is missing or not, and whether the bearing
and the spacer are rusted. If necessary, please replace the bearing and spacer. If the bearing
rotates normally, the oil seal is not damaged. After all the parts are dry, apply oil seal, needle
bearing and inner bushing evenly with lubricating oil;
(6) Put the removed materials back in order, lock everything.
Note :
When installing the spacer, oil seal and bolt back, do not install the wrong size.
3. Fork bearing
After 7.5 hours of riding, disassemble, clean, inspect, and lubricate all oil seals, bearings,
and bushings of the flat fork to maintain proper suspension performance and minimize
component wear and service life.
(1) Place a bench under the engine to make the rear wheel off the ground;
(2) Remove the rear wheel and rear disc brakes under the pump;