CRZ ERZ Series, Manual

Page: 78 / 127

78
Riding of the motorcycle
First. Shift operation
The bike is a six-speed transmission with constant meshing two-stage transmission.
The first and second gears are low speed, the 3rd and 4th gears are medium speed, and
the 5th and 6th gears are high speed. For shifting, please refer to the following operations.
(1) When the engine is at idle speed, the left hand grasps the clutch handle to
disengage the clutch, and the left foot is used to step down the shift lever to make the
transmission enter the first gear position;
(2) Gradually increase the engine speed, slowly release the clutch handle, so that
these two actions cooperate with each other to ensure the smooth start of the motorcycle;
(3) After reaching smooth running, reduce the engine speed, pinch the clutch
handle, hook the shift lever with the left foot and lift it up, so that the transmission enters
the second gear, then gradually increase the engine speed, slowly release the clutch
handle, two actions are required coordinate with coordination to ensure smooth running
of motorcycles;
(4) We can follow the third step when you want to change the gears;
(5) When the gear is downshifted, the speed should be reduced. The left hand pinch
the clutch handle to disengage the clutch, and use the left foot to step forward and lower
the lever. When downshifting, you need to downgrade step by step;
(6) When shifting gears, make sure the shift lever is in place and release the clutch
handle. It is strictly forbidden to shift gears when the throttle is not returned and the
clutch is not pinched, otherwise the engine and transmission system may be damaged and
a safety accident may occur.
Following picture shows the step of gear shift.