System Maintenance
36
/
55
b)
For HDI-1600, in the LaBoo Software, use the command functions “Open Platform”and “Close
Platform” to open or close the device top plate loading platform, you may to see and observe the
plate pressing roller (mounting roller) and drum surface conditions and its mechanism
components, please use dry cloth to clean and wipe these area if found dusty.
6.1.2Lens cleaning: After long period of usage, even its dust removal module, front lens sections are
parts that could get dust accumulates, and could affect laser power, focus efficiencies
during operation, and therefore this need regular cleaning maintenance;
a)
For HDI-600/HDI-920 series, open the right side service access cover of the device ,
you can observe and access Optical Power sensor and the optical lens section for
cleaning;
b)
For HDI-1600, open the upper right side of the device casing cover, you can observe
and access Optical Power sensor and the optical lens section for cleaning; however
when opening the casing, be carefully of the Emergency Switch cable connection that
attaches to the casing. Avoid pulling and not to break the cable line and damage the
switch.