Operation Instructions
14
/
55
4.5.5Removal of aluminium foil:
Cut the foil bag at the bottom in circle, then remove foil bag (Figure 4).Be careful not to scratch the
equipment while cutting the foil bag.Then unscrew the hex screws 8-M6 * 10, unscrew the nut
4-M10,remove the fixing brackets(Figure 4);
Note: Depends on season and modes of transportation, method of packing could be done either
withwrapping bag, and/or aluminum foil bag. The description here refers of an aluminum foil bag as
an example;
Figure 4: Aluminium foil and equipment fixing brackets figures
4.5.6 Remove of bundled accessories:
Find the opening and remove of stretch film, remove the equipment spare parts and accessories and
keep it in a safe place for later use.
4.5.7Device lifting and positioning:
While using a forklift to lift up the HDI device, length of folds should be beyond the center gravity of the device,
and forks tips should be kept out of the wooden pallet base. Keep attention and maintain stable while shovel
and lifting the device. Moves the device to the installation location and carefully lower it down onto the ground.
4.5.8 Device level adjustment / power on
a)Adjust the device’s 3 support legs so that the legs are evenly weight down, and having the
transporting wheels levitated.At the same time adjust the overall level of device;
b) Connect the device power according to the power connection requirements;
