Operation Instructions
21
/
55
5.3.8 Enter to the device parameter settings: After engineer mode password is entered, there will be a
pop-up windowswith 3 options prompted. Click on the right option “Parameters” button.
5.3.9To read in device parameters, there are 2 options available::
a)
Import from file
: Obtained one of the disk(Parameters disk) that bundled with device. Insert it into
the CD-ROM drvive, then clicks on “Import from file”, and browse for the file in the disk that named
with the device’s serial no. Select and confirmed to read in the parameter values from the file into
the LaBoo-HDI software.
b)
Read from device
:Click on this option to allow LaBoo-HDI software to read in (download) the
parameter values directly from the HDI device connected.