Operation Instructions
31
/
55
a)
While in job “Output” command, or “Load Plate” command, the HDI device will proceeds with plate
loading procedures.
b)
Device’s loading platform is ready at home position,the
button’s light is flashing state.
You may place the plate on the loading platform now. (Make sure to place the correct plate size
according to template specification). Place and position the plate front to the loading platform edge,
and align it correctly to the right side anchorruler guide.
c)
Press the
button, loading platform will reposition and move downwardtouching the drum
surface(close to the plate mounting position, withthe Head Clampin opening state). At this time,
the
button light is flashing, awaitingto be pressed for the next operating action.
d)
Press the
button, loading platform (with plate) will slightly move inner to the openedHead
Clamp, and follow by Head Clamp closing to have the front plate edge fastened. Drum vacuum will
