Operation Instructions
33
/
55
f-1) Press on the
button, loading platform will return to its original home position, and HDI
device will starts output imaging.
f-2)If
button is pressed,loading platform is remained unmoved after lifted up(drum
uncover), HDI device will proceeds with output imaging. Not advise for normal user operation.
5.6.2
Unloading process:
a)
Once job “Output” process is completed or “Unload Plate” command is executed, the HDI device
will proceeds with plate unloading procedures.
b)
HDI device will open and lower its loading platform onto drum surface, then move in closer to the
unloading position, where drum has positioned the plate end with the adhesive taped for easy
access by operator for next tape removal process, which is now the
button’s light is
flashing, awaiting to be pressed for next operating action.
c)
After removal of the adhesive tape on the plate end,observe plate on drum adsorption condition.
If found plate end mounted is still tight on drum surface, need to manually assist to peel off and
release plate end to be correctly position on the loading platform front edge for next unloading
process. Once confirmed, press the
button for unloading,drum will rotates until the
Header Clamp release position(same time plate is transferred back to the loading platform).At this
time, the
button’s light is flashing, awaiting to be pressed for next operating action.
d)
Press the
button, loading platform lifted up to the top position, again the
button’s
