Crestron SIMPL Windows Installation & Operating Manual Download Page 108

Page: 108 / 230

Software Crestron

SIMPL™ Windows



Begin Testing with Test Manager

Launch

Test Manager from either the button bar or the tools menu.

Test Manger Checking Baud Rates

If Test Manager cannot communicate with the control system, a warning box will
display “No Communications with rack”.

No Communication with System

NOTE:

The control system always runs the last uploaded version of the program.

Changes made to a program are not reflected by the control system until the new
program is compiled and uploaded.

The Test Manager environment will be displayed. The selected signals (signals with
the Set Watch active) will be displayed in the

Status Window

•

Crestron SIMPL Windows

Installation & Operations Guide – DOC. 5728C

Summary of Contents for SIMPL Windows







































































































































































































































Search results

Summary of Contents for SIMPL Windows

Reviews:

Related manuals for SIMPL Windows

Brands by name

Popular brands

Crestron SIMPL Windows, Installation & Operating Manual

Search results

Summary of Contents for SIMPL Windows

Reviews:

Related manuals for SIMPL Windows

Brands by name

Popular brands