Crestron CP4-R Product Manual Download Page 79

Page: 79 / 266

Product Manual – DOC. 8432A

Crestron Pyng OS 2 for CP4-R

•

Configure Keypads

Select a keypad device from the Select an Item menu to display a configuration screen

for the keypad.

NOTE:

Horizon™ keypads provide additional settings, such as backlight customization,

that are configured using the keypad and not through Crestron Pyng. For more

information, refer to the HZ-KPCN Installation Guide (Doc. 8285) at

www.crestron.com/manuals

Actions & Events Screen - Basement Keypad1

Use the keypad configuration screen to configure keypad button colors and layout, to

create custom keypad button labels, and to program keypad buttons to recall scenes

and other actions.

The following configuration options are provided:

Tap the location button

to turn on the location feature for the keypad (if supported),

which may be used to locate the device in the room.

Summary of Contents for CP4-R











































































































































































































































































Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands

Crestron CP4-R, Product Manual

Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands