Crestron CP4-R Product Manual Download Page 197

Page: 197 / 266

Product Manual – DOC. 8432A

Crestron Pyng OS 2 for CP4-R

•

191

Display

Tap Display from the Hardware menu to display the Display screen.

Settings Screen - Display

Use the Display screen to configure the touch screen LCD display settings.

•

Brightness

Tap the On and Off buttons under Auto to turn on or off automatic

brightness for the touch screen display. When On is selected, the touch screen

display adjusts its brightness based on the ambient light level in the room.

Tap the up and down arrow buttons to raise or lower the touch screen

brightness manually from 0 to 100%.

•

Timeout: Swipe up or down through the menu to select the duration before the

touch screen enters standby timeout mode and displays a black screen. Select

Never to disable standby timeout mode.

•

Hard Key Wakes LCD: Tap On or Off to turn on or off the user's ability to wake

the touch screen display by pressing one of the hard keys.

•

Screensaver: Tap On or Off to turn on or off using a touch screen screensaver

during standby timeout mode.

Summary of Contents for CP4-R











































































































































































































































































Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands

Crestron CP4-R, Product Manual

Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands