Crestron CP4-R Product Manual Download Page 23

Page: 23 / 266

Product Manual – DOC. 8432A

Crestron Pyng OS 2 for CP4-R

•

Pair Wireless Devices

To pair wireless devices with the Crestron Pyng system:

NOTE:

For best practices regarding the installation and setup of Crestron RF (radio

frequency) products, refer to the Installation and Setup of Crestron RF Products Best

Practices Guide (Doc. 6689) at

www.crestron.com/manuals.

Select Crestron Wireless from the Device Types menu.

Select a wireless gateway from the Select Gateway Below menu.

Pair Devices Screen - EX Gateway

NOTES:

∙ A wireless gateway, such as the CEN-GWEXER, must be installed and

configured on the network prior to pairing devices. For more information,

refer to the gateway documentation.

∙ If a TSR-310 will be added to the system, ensure that the TSR-310 is

connected to a WAP that is in Crestron's list of recommended WAP

brands. For more information and a complete list of brands, refer to the

TSR-310 Supplemental Guide (Doc. 8226) at

www.crestron.com/manuals

Tap Start Pairing to place the selected gateway into acquire mode.

Place the wireless device(s) into acquire mode as described in the device

documentation. Acquired devices display underneath the gateway on the Pair

Devices screen.

Summary of Contents for CP4-R











































































































































































































































































Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands

Crestron CP4-R, Product Manual

Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands