Crestron CP4-R Product Manual Download Page 78

Page: 78 / 266

•

Crestron Pyng OS 2 for CP4-R

Product Manual – DOC. 8432A

Actions & Events

Tap the Customize Actions & Events button on the Configuration screen or the Actions
& Events button

on the setup menu to display the Actions & Events screen.

Actions & Events Screen

Use the Actions & Events screen to configure the behavior of remotes and keypads,

occupancy sensors, door locks, security systems, remote system events, media zone

events, and quick actions.

Scenes and other actions may be programmed to occur when a button is pressed or a

system event is triggered.

NOTE:

The same basic configuration settings are provided for each item, although some

settings are added or removed for different device types and models. Refer to the

following sections for specific information on each configurable device.

To select an item for configuration:

Select the room that contains the item from the Select a Room menu.

Select the item to configure from the Select an Item menu. A configuration

screen for the device is displayed.

Tap the back arrow button

to return to the Configuration screen.

Summary of Contents for CP4-R











































































































































































































































































Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands

Crestron CP4-R, Product Manual

Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands