Crestron CP4-R Product Manual Download Page 172

Page: 172 / 266

166

•

Crestron Pyng OS 2 for CP4-R

Product Manual – DOC. 8432A

Configure a User Climate Event

To configure an existing climate event:

Select a thermostat from the drop-down menu on the top left of the screen.

Tap the menu button

on the top right of the screen.

Tap Edit Schedules. The Schedules screen for the thermostat is displayed.

Schedules Screen - Climate

The Schedules screen lists the thermostat events that have been created for the

thermostat. Each thermostat event provides the time and days that it is scheduled to

occur, as well as its cooling and heating set points.

The following configuration options are provided:

•

Tap the pencil button

to edit the thermostat behavior for the climate event. A

dialog box for editing event settings is displayed. Use the settings described in

"Create a User Climate Scene" on page 164 to configure the climate event.

•

Tap the trashcan button

to delete the climate event.

•

Tap the back arrow button

to return to the climate screen.

Summary of Contents for CP4-R











































































































































































































































































Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands

Crestron CP4-R, Product Manual

Search results

Summary of Contents for CP4-R

Reviews:

Brands by name

Popular brands