Creo Leaf Valeo, Installation Manual

Page: 115 / 143

66 Chapter 9 – Large Format
Before Getting Started
This chapter describes the Leaf Valeo digital camera back installation as it
applies to large format cameras and other view cameras.
With the Rollei electronic shutter and the Rollei Lens Control unit, the
Leaf Capture V8 application enables you to change shutter speed and lens
aperture on the large format camera from the application.
The Leaf Valeo digital camera back can also be used with a mechanical
shutter lens such as the Copal shutter.
Items Required for the Installation
The following table describes what is required for the Leaf Valeo digital
camera back installation when working with the Leaf
Large Format Power
Kit for the Rollei electronic shutter or a mechanical shutter lens.
Important:
To avoid installation and operation problems, use only the
accessories supplied in the Leaf digital camera back kit.
Kit Contents Required for
Basic
Installation
Leaf Valeo digital camera back
Yes
Camera-to-Back Sync cable Yes
FireWire cable (4.5 m / 15 ft.) Yes
4 x 5 Graflock adaptor Yes
Live Video View software access key Yes
Leaf Capture V8 software CD Yes
Documentation (Leaf documentation CD and printed documentation) Yes
Additional Items Required for
Rollei Electronic Shutter Installation
Rollei Lens Control Yes
Lens Control power interface Yes
AC adaptor for Rollei Lens Control and power cord Yes
Rollei-Valeo Lens Control interface cable Yes
Lens Control flex holder and clamp Yes