Creo Leaf Valeo, Installation Manual

Page: 99 / 143

50 Chapter 7 – Mamiya RZ67
Connecting the Cables
This section contains procedures for connecting various cables for use with
the Mamiya RZ67 camera.
Connecting the Camera Control Cable
1.
Insert one end of the Camera Control cable (lever facing down) into
the Mamiya release jack on the front of the camera.
2.
Turn the lever to the
L
position to lock it.
3.
Insert the opposite end of the cable into the Camera Control socket on
the Leaf digital camera back.
Connecting Camera Control Cable to Leaf digital camera back
Note:
Make sure the lever on the Camera Control cable is in
O
position.