Creo Leaf Valeo, Installation Manual

Page: 126 / 143

Attaching Camera Adaptor to Camera Body 77
Attaching Camera Adaptor to Camera Body
1.
Place the camera adaptor on the bottom of the camera body.
2.
Align the screwhole on the adaptor with the screwhole on the camera
body (see the illustration
Attaching camera adaptor to camera body on
page 77). Refer to the following table to determine which adaptor
screwhole to use.
3.
Insert the screw and tighten it.
Attaching camera adaptor to camera body
Hole
Symbol Camera Type
Contax 645
Hasselblad (500 series and H1), Mamiya RB67, Mamiya RZ67, DigiFlexII,
Bronica SQA-I
Mamiya 645 AF-D, Bronica ETR-SI, Fuji 680GX
Tripod
3/8” socket
Tripod
1/4” socket
Note:
You can mount your camera on the tripod using one of the tripod sockets
without removing the camera adaptor.