Creo Leaf Valeo, Installation Manual

Page: 54 / 143

Attaching the Repeater 5
Attaching the Repeater
1.
Connect one of the FireWire cables from the computer to the single-
side connection of the repeater.
2.
Connect the other FireWire cable from the Leaf digital camera back to
one of the ports on the double-side connection of the repeater.
Attaching repeater
Tip:
When you connect the FireWire cable after you start the Leaf Capture V8
application, the software automatically connects to the Leaf digital camera back
and recognizes the connected camera type.
Notes:
Attaching the repeater is optional.
If you want to extend the FireWire cable from 4.5m / 15 ft. to 9m / 30 ft., you
can purchase the Leaf Repeater and Cable Kit.
Note:
To comply with the CE/FCC standard regulations, it is recommended to
use the FireWire cables that are supplied by Leaf.