Creo Leaf Valeo, Installation Manual

Page: 78 / 143

Installation Procedures 29
Removing the Leaf Digital Camera Back From the Camera Body
1.
Place the camera on a steady, flat surface.
2.
Turn the camera off.
3.
Disconnect the FireWire cable.
4.
Press gently on the center of the magazine release button, twist it
clockwise until it stops (1), and then press the button firmly inwards
toward the camera body (2) to release the Leaf digital camera back.
Removing Leaf digital camera back from Hasselblad H1 camera
Important:
Make sure to press on the center of the magazine release
button, not on the lever.
1
2