Test the Wi-Fi
®
Signal Strength in your garage
You will need a router with Wi-Fi and a smartphone or other
mobile device. Make sure your mobile device is connected to your
Wi-Fi network. Hold your mobile device in the place where your
garage door opener will be installed and check the Wi-Fi signal
strength.
Wi-Fi signal is weak.
The garage door opener will
likely
connect to your Wi-Fi network. If not,
try one of the options below.
No Wi-Fi signal.
Try one of the following:
• Move your router closer to the garage
door opener to minimize interference
from walls and other objects
• Buy a Wi-Fi range extender
• Buy a Craftsman Garage Door Opener
Connectivity Hub (041A7665) see
Accessories
Check Signal Strength. If you see:
Wi-Fi signal is strong.
You’re all set!
Install your new garage door opener.
Visit smartgdo.craftsman.com for more details
See Smartphone Control page 32 to connect your garage door
opener to your Wi-Fi network. Do NOT connect prior to
installation.
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
Tools needed
During assembly, installation and adjustment of the opener,
instructions will call for hand tools as illustrated below.
Stepladder
Drill Bits 3/16",
5/16", and 5/32"
Claw Hammer
Carpenter’s Level
(optional)
Pencil
Screwdriver
Drill
Wire Cutters
Adjustable End Wrench
Tape Measure
Pliers
Sockets and Wrench 1/2",
5/8", 7/16", 9/16", and 1/4"
Hack Saw
4
