Viper Service Manual
© 2008-201, IMI Cornelius Inc.
- 58 -
Publication Number: 621260373SER
Cleaning the Water Filter
The water filter screen in the rear of the unit should be removed and cleaned
every six months, during the preventative maintenance procedures. To inspect
and clean the filter screen, perform the procedure in Table 42.. Refer to Figure
39 for water filter location.
Figure 39. Water Filter Location
Table 42.
Step
Procedure
1.
Disconnect power from the unit.
2.
Turn off and disconnect the water supply to the unit.
3.
Remove the rear cover of the unit.
4.
Disassemble the water filter. (Use two wrenches, if necessary)
5.
Remove the filter and rinse it under running water to remove any debris.
6.
Reassembe the filter.
7.
Connect and turn on the water supply to the unit.
8.
Check the filter for any leaks.
9.
Replace the rear cover.
10.
Reconnect power to the unit.
Water
Filter
