CORBERO CC900X, User Manual

Page: 24 / 167

24
G
B
For natural gas connection;
Gas hose passage way
Figure 1
Figure 2
WARNING: Natural gas connection should be
done by authorized service.
For natural gas connection, place gasket in
the nut at the edge of natural gas connection hose.
To install the hose on main gas pipe, turn the
nut. Complete the connection by making gas
leakage control.
Connect the appliance to the gas piping tap
in shortest possible route and in a way
that ensure no gas leakage will occur.
In order to carry on a tightness and
sealing safety check ensure that the
knobs on the control panel are closed
and the gas cylindir is open.
WARNING: While performing a gas
leakage check, never use any kind of
lighter, match, cigarette or similar
burning substance.
Apply soap bubble on the connection
points. If there is any kind of leakage
then it will cause bubbling.
While inserting the appliance in place
ensure that it is on the same level with
the worktop. If required adjust the legs
inorder the make level with the
worktop.
Use the appliance on a level surface and
in a well ventilated environment.
WARNING: Before placint the appliance, check that the local distribution
conditions (gas type and pressure) conform to the product settings.
Main Gas Pipe
Gasket
Nut
Natural Gas
Connection Hose