Coral Telecom DX2000XL, User Programming Manual

Page: 104 / 141

User & Programming Manual
DX2000 XL – Hotel Version
104
`Don’t disturb’ Mode Setting for Checked-Out Room
If an extension which is defined as a room, is checked-out, that room will set in `Don’t disturb
mode’. It can be programmed that room should not be set in DND mode (if required).
To enable the same, command is
56 + 00 + 049 + 001 + 00
To disable the same, command is, 56 + 00 + 049 + 000 + 00
Remember, room extensions will come in DND mode only if that room extension is defined as
`room’.
Default: Extensions defined as `room’ will be in DND mode on checking-out.
CLI on Analog Trunks
If CO lines are having the DTMF CLI facility, DX can capture the DTMF CLI. To enable the
capturing of the CLI on the CO lines, command is,
56 + 00 + 125 + 001 + 00 - To enable the CLI on analog trunks.
56 + 00 + 125 + 000 + 00 - To disable the CLI on analog trunks.
Important: To avail this feature, ATC/ATD should be loaded with the DTMF receiver for
CLI detection.
Setting of CLIP Timer for detecting CLI
On landing an incoming call through analog trunk carrying CLI, DX needs some time to
detect the CLI properly. This time is known as `CLIP Timer’.
To define the same, command is,
56 + 00 + 048 + 00X + 00
Where `X ‘ is the time in seconds.
Default: CLIP Timer is 5 seconds.
Trunk CLI Extending while transferring a trunk call
While transferring a CO call, first extension’s CLI will be extended & if unscreened call
transfer is made, trunk CLI will be forwarded. However trunk CLI can be extended before
making the unscreened transferred.