COOK K-FTH-1012, Instructions For Use Manual

Page: 14 / 293

K-FTH-1012 Instructions for Use English
1-12
1
7. Technical data
Classification according to IEC 60601-1
Type of protection against electric shock: Class I equipment
Degree of protection against electric shock: Type B
Degree of protection against harmful
ingress of solids and water: Test Tube Heater: IP64
Power Supply: IP20
General specifications
Power supply (voltage): 100 - 240 VAC
Frequency: 50 - 60 Hz
Maximum current: 1.1 A
Environmental Operating Conditions: +15 to +30°C
10 to 90% RH
700 hPa to 1060 hPa
Storage and transport directions: -10 to +50°C
5 to 90% RH
Manufactured and tested to the following
standards: IEC 60601-1: 1988+A1:1991+A2:1995
IEC 60601-1: 2005 + A1: 2012(E)
IEC 60601-1-2: 2014
Set temperature accuracy: ± 1 °C
Dimensions:
Test Tube Heater:
150 x 100 x 28 mm (excluding base/cable)
Power Supply:
121 x 50 x 31 mm (excluding cables)
Weight:
Test Tube Heater: 0.7 kg
Power Supply: 0.3 kg
Guidance and manufacturer’s declaration – electromagnetic emissions
The Test Tube Heater is intended for use in the electromagnetic environment specified below. The
customer or the end user of the Test Tube Heater should assure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment Guidance
RF emissions
CISPR 11
Group 1
The Test Tube Heater uses RF energy only for its
internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
The Test Tube Heater is suitable for use in all
establishments, including domestic establishments and
those directly connected to the public low voltage
power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies