Consilium Salwico CS4000, Installation Manual

Page: 78 / 277

User Guide Chapter 2: Operations
26
Salwico CS4000
Disconnections
It is possible to disconnect different parts of the system, such as:
zones, detectors, manual call points, section units, alarm devices,
external control devices and loops. All disconnections are placed in a
disconnection list. The yellow indication
DISC
. is lit on the control
unit when the first disconnection is defined in the system and remains
lit until all disconnections are reconnected.
To be able to make a disconnection you must enter access level 2B or
higher.
WARNING! When a fire detector or zone is disconnected the fire
alarm system will not be able to detect any occurring fire in that area.
It is therefore important that disconnections are minimized in terms of
quantity of disconnected units and duration of time.
For example if dual detectors heat/smoke are installed it is possible to
disconnect only the smoke detection part of the detector and keep the
heat detecting part active or vice versa.
Disconnections available
There are four different disconnections available:
Permanent disconnection
The disconnection is permanent until it is manually reconnected.
Timer disconnection
Disconnection is instant and lasts for the time period entered (hh:mm).
Maximum disconnection time is 23h 59m.
Clock disconnection
Enter reconnection time. Disconnection is instant and the reconnection
will take place next time the entered time occurs. Maximum
disconnection time is 23h 59m.
Periodic disconnection
A disconnection for a certain time period during certain days of the
week. Example: Disconnect zone 1 each Tuesday and Friday
between 7.00 – 17.00.
Acknowledgement of a new disconnection
After entering a new disconnection correctly, an acknowledgement is
presented on the control panel. The new disconnection is also added in
the disconnection list under:
Menu/ 3 Disconnections/ 2 Disconnection list