Consilium Salwico CS4000, Installation Manual

Page: 143 / 277

CS4000 System boards
ZB, Zone Board
Part no. 462006
System: Salwico CS4000 fire alarm
Description
The printed circuit board ZB, Zone Board, is a system
module in the Salwico CS4000 fire alarm system.
The Zone Board is a connection board for
16 conventional detector zones or 16 digital inputs*.
Each conventional zone can accommodate up to
approximately 50 detectors, depending on the total
power consumption on the zone.
For more information about how to connect the
different CS4000 system boards together, please refer
to the CS4000 Service & Maintenance manual.
Specifications may be subject to change for improvement without prior notice Data sheet no: 462006 ZB zone board 06 4 E
Page 1 of 3
Ç Consilium
Consilium Marine AB
P.O. Box 8763, SE-402 76 Göteborg
Phone +46 31 7107700 Fax +46 31 7107800
www.consilium.se
Address switch
The 8-pole DIP switch is used to set the address for
ZB Zone Board. Each board in a system has its own
unique address.
The address no. can be set from 1 to 255.
Data
Nominal voltage 27 VDC
Working voltage 19-30 VDC
Working current 140 mA
Max current/zone 100 mA
Max total current 1 A
Cable terminals 2.5 mm
2
Temperature range 0°C to +55°C
Weight ~220 g
Dimensions (bxhxd) 247x139x18
ELR fire zones 10k
Ω
Series resistor, input ~300
Ω
*If the Zone Board is used as an input board, a resistor
(~300
Ω
) must be connected in series with the closing
input contact.
Example address switch setting:
1 2 3 4 5 6 7 8
O
N
1 2 4 8 16 32
64 128
Board adress no.
1+4+64=69
Block diagram