Consilium Salwico CS4000, Installation Manual

Page: 32 / 277

Installation Manual
Chapter 4: Commissioning requirements
Salwico CS4000
22
Part C: Central status
1. All control and indication functions must be connected to relay
outputs. Outputs and inputs according to Consilium terminal
drawings.
2. All loops shall be connected to the central according to Consilium
terminal drawings.
3. All deviations from above criteria cause delay-time and any
consequence will be invoiced.
4. No power to be connected to the central unit without presence of
a Consilium engineer!
The requirements are made in order to minimise the start-up costs for
yard/owner during the commissioning.
Summary
The following document must be filled in and faxed to Consilium
+46 - 31 710 78 00 and your local Consilium representative in your
country before commissioning of the system starts.
”Address list/test report”, appendix A, one for each loop.