Consilium Salwico CS4000, Installation Manual

Page: 171 / 277

Optical smoke detector
Salwico EV-P
Part no. 40020
System: Salwico CS3000, CS4000 and NSAC-1
Description
Salwico EV-P is an analogue addressable smoke detector
with an optical chamber.
Salwico EV-P is designed to give early warning for the
presence of smoke in the supervised area. At the same
time the detector offers a high protection against
unwanted alarms.
Salwico EV-P is equipped with OMNIVIEW 360° LED
indicator giving a clear, full 360° visibility of the red
alarm indication.
The technical detector address is set with a special
programming tool. Valid addresses are 1-254.
The detector can be placed in harsh environments if it is
mounted on a splash proof base. See separate document
“Base matrix Salwico units” for information about
suitable base plate.
Salwico EV-P has a fine pitch net which improves the
response to smoke and also reduces the amount of dust etc
entering the detector.
Salwico EV-P is equipped with an output for external
indication.
Data
Function Analogue, addressable,
scattering light.
Nominal voltage 24 VDC
Working voltage 20-37 VDC
Working current 0.2 mA
Alarm current 5 mA
Remote output max 3 mA
Ingress protection Depends on base
Cable terminals Depends on base
Temperature range -25°C to +70°C
Air humidity 0-95% RH
Material PC/ABS
Colour White
Weight (w/o base)
~120 g
Standard EN54-7
Programming tool
Part no. 040300
Important notice: Do not remove the dust cover from
the detector until all polluting (dusty) activities are
finished and the area has been cleaned.
Specifications may be subject to change for improvement without prior notice Data sheet no: 40020.EV-P.08.1.E
Ç Consilium
Consilium Marine AB
P.O. Box 8763, SE-402 76 Göteborg
Phone +46 31 7107700 Fax +46 31 7107800
www.consilium.se
Dimensions (mm)
Loop in Loop out
3(-)
6(-)
1(+)
3 mA remote
output
Connection
TYPICAL HEIGHT WITH: IP22 BASE = 58
IP55 BASE = 92