Consilium Salwico CS4000, Installation Manual

Page: 180 / 277

Manual Call Point, IP55
Salwico NS-ACP-IP55
Part no. N11305
System: Salwico CS3000*, CS4000, NSAC-1 fire alarm system
Description
The NS-ACP-IP55 is a manual call point for the
addressable fire alarm system Salwico CS4000, NSAC-1
and CS3000 with SPK2000. The ingress protection IP55
makes this call point suitable for harsh environments.
Pressing the glass causing it to crack activates the fire
alarm. A protective plastic coating on the glass prevents
operator injury.
A red LED is lit on the call point when the control panel
has received the alarm. It will be lit until the glass has
been replaced and the alarm has been reset at the control
panel.
The address is set with a DIP-switch mounted inside the
call point.
The call point is polarity independent.
Data
Nominal voltage 24 VDC
Working voltage 15-35 VDC
Working current
- supervising 0.2 mA
- alarm 2.5 mA
Ingress protection IP55
Cable dimension Ø 8-12 mm
Temperature range -25°C to +70°C
Ambient humidity 0 to 95% RH
Colour Red
Weight ~410
g
Spare glasses (10 pcs.) Part no. N1311
*Only with SPK-2 for NOSE based units.
Test & Dimensions (mm) 4xØ5 mounting holes
Side view
109
122
6.5
80
120
86
17
The call point can easily be tested
by inserting the test key that
comes with each call point.
___________________________________________________________________________________________________
Connection
Specifications may be subject to change for improvement without prior notice Data sheet no: N11305.NS-ACP-IP55.07.1.E
Ç Consilium
Consilium Marine AB
P.O. Box 8763, SE-402 76 Göteborg
Phone +46 31 7107700 Fax +46 31 7107800
www.consilium.se