![background image](http://html1.mh-extra.com/html/conair/trueblend-tb500-4/trueblend-tb500-4_user-manual_2649034035.webp)
TrueBlend
™
Transport and Setup
Edition: February 2007
33
4.5 Making
connections
4.5.1 Compressed air connection
Î
Connect the air hose [1] to the compressed air connection of the unit [2].
The operating pressure must be at least 0.6 MPa (87.0 psi) (6 bar).
Î
Check the operating pressure with the manometer [3] and if it is different set it
to 0.6 MPa.
[1] Air hose
[2] Compressed air connection
[3] Manometer
Fig. 6: Connecting compressed air
NOTE
No additional compressed air consumers may be connected to the unit, be-
cause this may reduce the operating pressure. If the operating pressure is
less than 0.6 MPa the loading precision may be affected.
4.5.2 Electrical
connection
Î
Connect the gravimetric batch blending unit to the mains power-supply system.
Î
Check that the unit functions after assembly (see 7.7 Startup).
NOTE
Electrical supply must be a clean power source with nothing else on the cir-
cuit (for example self-loading loaders.) The unit must be grounded to a lug by
the sensor on the back of the unit.
Summary of Contents for TrueBlend TB500-4
