Appendix
TrueBlend
™
142
Edition: February 2007
3
Enter the default flow rates into the blender control on the dosing rate
screen.
4
Select the proper default settling times for the different valve
configurations from the following table:
Table from Product group
Example
: Blender XYZ
Component 1 – 3” X 6” valve – 1.5 s
Component 2 – 3” X 6” valve – 1.5 s
Component 3 – 2” X 3” valve – 1.5s
Component 4 – 2” X 3” valve – 1.5 s
Component 5 – 2” i.d. feeder – 5 s
Component 6 – 1” i.d. feeder – 10 s
5
Enter the default settling times into the blender control on the settling times
screen.
6
Run a material calibration (see section 7.7.2) for each of the components.
7
Run the blender, making sure that all materials are present in sufficient
quantities for correct operation. While running, the blender control will
automatically adjust the dosing rate for optimum operation.
Summary of Contents for TrueBlend TB500-4
