![background image](http://html1.mh-extra.com/html/conair/trueblend-tb500-4/trueblend-tb500-4_user-manual_2649034034.webp)
Transport and Setup
TrueBlend
™
32
Edition: February 2007
4.3 Setup
The unit can be mounted on the processing machine or operated as a centralized
mixing station. A frame with reservoir hopper and exhaust box is available if it is
used as a centralized mixing station. The frame can be bolted to the floor.
Î
Make sure that the base is as even as possible.
Î
Make sure that the switch cabinet and main door are accessible for mainte-
nance work at all times.
Î
Attach the separately supplied weigh bin carefully to prevent damage to the
load cell.
4.4 Positioning
controller
IMPORTANT
Please remove the protective film on the touchscreen control for optimum
performance
The controller for the TrueBlend can be fixed to the housing with two screws.
•
As delivered the rear screw is used to secure the unit for transport while the
front screw is attached to the screw hole. (A)
•
The controller with the support can be swiveled by 90° by loosening the rear
screw. (B)
•
The controller can also be removed from the support and fixed to a wall or
another position and connected with a 2 m (standard) or
6 m (optional) cable. The controller can be placed on a table and prevented
from slipping with the four antislip feet, which are supplied with the cable.
NOTE
This setup not possible on model TB45
[1] Mounting screws
[2] Rotary knob
Fig. 5: Swiveling controller
Summary of Contents for TrueBlend TB500-4
