Conair TrueBlend TB500-4, User Manual, Page: 27 / 150

MODELS TB250R-4
Performance characteristics
Batch size lb {g} 5.5 {2500}
Maximum throughput rate lb/hr {kg/hr}* 800 {363}
Bin capacity - main ingredient ft
3
{liter} 1.6 {45.3}
Bin capacity - minor ingredient ft 3 {liter} 0.3 {8}
Maximum number of materials 4
Number of vertical discharge valves 4
Number/(size) of major bin valves 2 - (60 mm)
Number/(size) of minor bin valves
(removable)
2 - (20 mm)
Dimensions inches {mm}
A - Height above mounting plate† 57.50 {1461}
B - Width 36.50 {926}
C - Depth 38.88 {988}
D - Control height 8.25 {209.6}
E - Control width 9.25 {235.0}
F - Control depth 4.75 {120.6}
Weight lbs {kg}
Installed 280
Shipping 400
Voltage total amps
115V/1 phase/60 hz 6.3
230V/1 phase/50 hz 3.2
Compressed air requirements
Discharge valves 90 psi @ 0.2 ft
3
/min
{6 bars @ 0.09 liters/sec};
1/4 in. NPT fitting
Maximum loader sizes
15 inch loaders - number of loaders - 2
8 inch loaders- number of loaders - 2
Top view Front view Side view
Mounting bolt hole size (8 holes) 9/16 inch {14.0 mm}.
Predrilled 8 x 8 and 12 X 12 mounting pattern as standard.
SPECIFICATION NOTES
*
Maximum throughput rates are based on 35 lb/ft
3
pelletized material
and using all standard valve sizes. Use of reducer inserts will lower
the rate shown.
†
The optional flow control valve will mount inside the chassis in the
space of the manual slide valve. Conair recommends using the
optional flow control valve when mounting the blender on a stand,
surge bin or hopper.
‡ TB250R-4 hopper position two is supplied with a 12-8 adapter with
an eight inch cover plate as standard. Position three and four are
supplied with hand-fill lids.
Specifications may change without notice consult with a Conair repre-
sentative for the most current information.
Control
MOUNTING INTERFACE
A
1
C
F
E
D
‡Position 4 ‡Position 3
Dimensions
shown in
inches and {mm}.
4 3
4 position
B
3-5/32
diameter
{80}
16-5/32 {410}
12 {305}
8 {203}
4-1/16 {103}
8-1/16 {205}
16-5/32 {410} 2-1/16 {53}
2-1/16
{53}
8-1/16
{205}
4-1/16
{103}
Mixing chamber access door -
this side of the interface.
Position 1
‡Position 2
Purchase the optional
material drain chute
that readily installs to the
chassis opening of the
blender for
fast and
simple cleanout.
Drain chute
Edition:
February
200
7
2
5
T e c h n i c a l S p e c i f i c a t i o n s
TPBS035-
0207
T r u e Bl e nd™ T B
250
-
R-4