3 - 4
l I n s t a l l a t i o n
3
Connect the power wires
to the three terminals at the top of the power disconnect.
4
Connect the ground wire
to the ground lug as shown in the photo.
C o n n e c t i n g t h e M a i n P o w e r
CAUTION:
Always disconnect and lock out the main power sources before making electrical con-
nections. Electrical connections should be made only by qualified personnel.
1
Open the dryer’s electrical enclosure.
Turn the discon-
nect dial on the dryer door to the Off or “O” position.
Lock out the main power (see Page 1-6 for complete
lock out information). Turn the captive screw, and swing
the door open.
2
Insert the main power wire
through the knockout in the
side of the enclosure or the rear of the dryer. ( The
dryer’s electrical wire connection location was a factory
option and may be connected through the front or the
rear of the dryer.) Secure the wire with an appropriate
strain relief.
IMPORTANT:
Always refer to the
wiring diagrams that came with
your dryer before making electrical
connections.
Summary of Contents for Carousel Plus W Series
