Conair Carousel Plus W Series, User Manual

Page: 32 / 193

3 - 1 2 l I n s t a l l a t i o n
( C o n t i n u e d )
M o u n t i n g a L o a d e r o n t h e H o p p e r
If you have a Conair loader or vacuum receiver, you can use the
flange and mounting clips provided on the top of the hopper.
Refer to the manuals that came with your receiver or loader for
detailed installation instructions.
Te s t i n g t h e I n s t a l l a t i o n
You have completed the installation. Now it’s time to make sure
everything works.
1
Make sure there is no material in the hopper. If you have
mounted a loader or vacuum receiver on the hopper, disconnect
the material inlet hose at the source or turn the loader off.
2
Turn on the main power to the dryer. Make sure the dryer’s
disconnect dial is in the ON position. This powers up the con-
trol and the display lights will illuminate.
3
From the Home Screen, press the
“System Overview” button.
4
From the Overview Screen, press the
magnifying glass button beside the
dryer. (Also referred to as the “Dryer
Zoom” button.)
5
From the Dryer Screen, verify that set-
points are correct, and press the dryer
start button.
When configured
as a central dryer,
the drying temper-
ature can not be
set since there is
no process heater
in the system.
125
-40
350