![background image](http://html1.mh-extra.com/html/conair/carousel-plus-w-series/carousel-plus-w-series_user-manual_2649066140.webp)
5 - 1 0
l M a i n t e n a n c e
C l e a n i n g t h e V o l a t i l e Tr a p o n t h e
D e m i s t e r
1
Stop the dryer and lockout the main power.
2
Remove the thumbscrews then remove the volatile demister cover.
3
Remove the demister
by pulling it out from the housing.
4
Clean the assembly using a mild soap and water.
Let the assembly dry thoroughly
before installation.
Note:
In cases of heavy volitales, steam cleaning or the use of solvents, such as acetone, may be neces-
sary. Be sure to test a small area with the solvent you have selected to be sure there is no adverse reaction.
5
Insert the demister carefully back into the
housing.
6
Inspect the condition of the gasket.
If it is
damaged, replace the gasket.
7
Secure the cover in place using the original
thumbscrews.
Make sure the cable is not
pinched between the housing and the cover.
✐
Summary of Contents for Carousel Plus W Series
