C o n t r o l F u n c t i o n D e s c r i p t i o n s -
S t a n d A l o n e C o n f i g u r a t i o n
( c o n t i n u e d )
Ethernet Setup screen
To access the Ethernet Setup
screen:
1
Press the Settings button
from the Home screen.
2
Press the Ethernet Setup button
.
The Ethernet Setup screen provides the user with the ability to view current HMI Ethernet
settings, load factory default Ethernet settings, or to change and apply new Ethernet set-
tings.
To load the factory default Ethernet settings:
1
Press the Load Factory Default Ethernet Settings button.
2
Press the button to confirm that you want to load the factory
default settings
. Press the X button if you want to exit without
loading the default factory settings.
To apply new Ethernet settings:
1
Enter the new settings in the white boxes with thick
black borders.
When you touch the setting inside the
box, a pop up number pad will appear.
2
Use the number pad to enter the new setting
. Press
the enter button on the number pad to enter the new
setting.
3
Repeat steps 1 and 2 for each address setting.
4
Press the Apply NEW Ethernet Address
Settings Now button.
5
Press the button to confirm that you want to apply the new
settings
. Press the X button if you want to exit without applying
the new settings.
NOTE:
Proper login is required to
change these settings.
✐
4 - 7 4
l O p e r a t i o n
NOTE:
Conair’s default IP address
setting for the DC-T control is
10.1.12.1 as shown in the graphic
to the right.
✐
Summary of Contents for Carousel Plus W Series
