Conair Carousel Plus W Series, User Manual

Page: 71 / 193

4
O
p
e
ra
ti
o
n
C o n t r o l F u n c t i o n D e s c r i p t i o n s - R W
C o n f i g u r a t i o n
( c o n t i n u e d )
Passive Alarm Setup (1 & 2)
To access the Passive Alarm Setup screens:
1
Press the Settings button from the Home screen.
2
Press the Alarm Setup button .
3
Press the Passive Alarm Setup button for the Passive
alarms you would like to configure (screen 1 or screen 2 - if
applicable).
4
Enter the desired setpoint and delay (if applicable) for
each alarm.
NOTE: Proper login is required to modify alarm settings. Depending on
your dryer configuration, your alarm choices and screen configurations
may vary from what is shown in this User Guide.
✐
NOTE: Some alarms require the user to enable the alarm, and to choose
between Passive or Shutdown alarm type. The first “power” button
enables or disables the alarm. The second button chooses between
Passive or Shutdown alarm.
✐
(continued)
IMPORTANT: Factory
default alarm setpoints
should not be changed
without first consulting
with Conair.
Conair’s Instant Access
24/7 Parts and Service
number is
800-458-1960.
Outside the U.S., dial
814-437-6861.
O p e r a t i o n l 4 - 3 7