6 - 3 6
l Tr o u b l e s h o o t i n g
R e p l a c i n g t h e D e s i c c a n t W h e e l
When desiccant becomes clogged or contaminated, you should replace the desiccant wheel
to ensure optimum performance.
1
Stop the dryer, disconnect the power, and follow proper lockout
procedures.
2
Remove the side panels of the dryer
.
3
Note the position of all the hoses and RTDs.
Disconnect the hoses and RTDs from
both manifolds and the wires from wheel assembly motor.
4
Remove the plastic roof panel from the dryer.
5
Remove 4 bolts securing the wheel assembly sup-
port bracket to the dryer frame.
Using a crane or
forklift, lift the entire wheel assembly out of the dryer
frame.
6
Remove the wheel support bracket from the wheel
assembly
, then lift the wheel assembly out of the
dryer.
7
Lift the new wheel assembly into place in the dryer
frame
, with the motor toward the rear of the dryer,
and bolt it into place.
8
Replace the plastic roof panel.
9
Reconnect the hoses and RTDs
to the manifolds and
the wiring to the wheel assembly motor.
10
Connect the power and start the dryer.
Verify the
wheel rotates smoothly and in the correct direction.
11
Replace side panels.
Summary of Contents for Carousel Plus W Series
