![background image](http://html1.mh-extra.com/html/conair/carousel-plus-w-series/carousel-plus-w-series_user-manual_2649066018.webp)
2 - 6
l D e s c r i p t i o n
S p e c i f i c a t i o n s : C a r o u s e l P l u s W S e r i e s
D r y e r s
MODEL
W150
W200
W300
W400
Performance characteristics
(with full hopper)
Drying temperature
†
All models 100° - 375°F {38° - 191°C} with options
Dew point
All models -40°F {-40°C}
Dimensions
inches {cm}
A - Height
64.3 {163.3}
B - Overall width
29 {73.7}
C - Depth
51.5 {130.8}
Outlet/inlet tube size OD
2.5 {63.5}
5.0 {127.0}
5.0 {127.0}
5.0 {127.0}
Weight
lbs {kg}
Standard dryer installed
600 {272}
660 {300}
710 {322}
760 {345}
Voltage
- Full load amps Standard/Central drying
230 V/3 phase/60 Hz
47.1 / 16.7
57.6 / 19.9
67.7 / 30.0
N/A
400 V/3 phase/50 Hz
*
23.4 / 8.9
32.1 / 10.4
37.9 / 16.2
64.5 / 21.1
460 V/3 phase/60 Hz
21.0 / 8.4
28.9 / 10.0
34.0 / 15.1
56.3 / 18.6
575 V/3 phase/60 Hz
16.8 / 6.7
23.7 / 8.6
27.3 / 12.2
43.2 / 13.0
Water requirements
{for aftercooler or optional precooler}
†
Recommended temperature
‡
45° - 85°F
Water flow gal./min. {liters/min.}
3 {11.4}
Water connections
NPT
3/4 inch NPT
SPECIFICATION NOTES:
*
Dryers running at 50 Hz will have 17% less airflow, and a 17% reduction in material throughput.
†
When drying below 150°F {66°C} a precooler is required.
‡
Temperatures above or below the recommended levels may affect dryer performance.
Tower, chiller or municipal water sources can be used.
Specifications may change without notice. Consult a Conair representative for the most current information.
C
B
A
APPLICATION NOTES:
All dryers are supplied with an aftercooler
as standard. The aftercooler reduces the
temperature of the return air from the dry-
ing hopper, improving the efficiency of the
desiccant. The aftercooler must be connect-
ed with the proper water flow rate and tem-
perature to attain the rated throughput.
When to use central models
Central dryers do not have process
heaters. These models should be used
when drying multiple materials that
require different drying temperatures.
Central models dehumidify the process
air, which is then heated to the correct
setpoint by a Heater Pack mounted on the
hopper and controlled from the dryer.
When to use additional filtration
The standard return air cartridge filter is
sized for the airflow of each dryer model
and is suited for most applications. You
should consider adding an optional dust
collector and/or volatile trap if:
●
The material contains excessive fines. An
additional dust collector or cyclone will
extend time between filter cleaning.
●
The material produces volatiles during
drying which condense into a waxy or
oily residue. A volatile trap will help to
protect the desiccant.
TPDX018-0113
Summary of Contents for Carousel Plus W Series
